Filter
Top Products
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide
137
3. Select the Enabled in the Status pull-down list.
4. Click the Save button to save the changes.
¾ To modify or delete an existing entry:
1. Find the desired entry in the table.
2. Click Modify or Delete as desired on the Modify column.
Click the Enable All button to enable all entries.
Click the Disable All button to disable all entries.
Click the Delete All button to delete all entries.
5.14 Bandwidth Control
Figure 5-69 Bandwidth Control
There are two submenus under the Bandwidth Control menu as shown in Figure 5-69: Control
Settings and Rules List. Click any of them, and you will be able to configure the corresponding
function. The detailed explanations for each submenu are provided below.
5.14.1 Control Settings
Choose menu “Bandwidth Control > Control Settings”, and then you can configure the Egress
Bandwidth and Ingress Bandwidth in the next screen (shown in Figure 5-70). Their values should
be configured less than 1000000Kbps.
Figure 5-70 Bandwidth Control Settings