Filter
Top Products
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide
117
Figure 5-45 Virtual Servers
¾ Service Port - The numbers of External Ports. You can enter a service port or a range of
service ports (the format is XXX - YYY, XXX is Start port, YYY is End port).
¾ IP Address - The IP address of the PC running the service application.
¾ Protocol - The protocol used for this application, either TCP, UDP, or All (all protocols are
supported by the Device.).
¾ Status - The status of this entry. "Enabled" means the virtual server entry is enabled.
¾ Common Service Port - Some common services already exist in the pull-down list.
¾ Modify - To modify or delete an existing entry.
¾ To setup a virtual server entry, you can follow these steps:
1. Click the Add New... button.
2. Select the service you want to use from the Common Service Port list. If the Common
Service Port menu does not list the service that you want to use, enter the number of the
service port or service port range in the Service Port box.
3. Enter the IP address of the computer running the service application in the IP Address box.
4. Select the protocol used for this application in the Protocol box: TCP, UDP, or All.
5. Select the Enabled option in the Status pull-down list.
6. Click the Save button.