Filter
Top Products
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide
21
For Hexadecimal, the length should be between 8 and 64 characters.
Please note that the key is case sensitive.
z Not Change- If you chose this option, wireless security configuration will not change.
3) Client – The device will act as a wireless station to enable wired host(s) to access AP.
Figure 3-14
z Wireless Radio- The wireless radio of the AP can be enabled or disabled to allow or deny
wireless stations to access. If enabled, the wireless stations will be able to access the AP;
otherwise, wireless stations will not be able to access the AP.
z Enable WDS- The AP client can connect to AP with WDS enabled or disabled. If WDS is
enabled, all traffic from wired networks will be forwarded in the format of WDS frames
consisting of four address fields. If WDS is disabled, three address frames are used. If your
AP supports WDS well, please enable this option.
z SSID- Enter the SSID of AP that you want to access. If you select the radio button before
SSID, the AP client will connect to AP according to SSID.
z MAC of AP- Enter the MAC address of AP that you want to access. If you select the radio
button before MAC of AP, the AP client will connect to AP according to MAC address.
z Region- Select your region from the pull-down list. This field specifies the region where the
wireless function of the AP can be used. It may be illegal to use the wireless function of the
AP in a region other than one of those specified in this filed. If your country or region is not
listed, please contact your local government agency for assistance.
z When you select your local region from the pull-down list, click the Save button, then the
Note Dialog appears. Click OK.