Filter
Top Products
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide
113
5.8.1 DHCP Settings
Choose menu “DHCP > DHCP Settings”, and then you can configure the DHCP Server on the
page as shown in Figure 5-40. The Device is set up by default as a DHCP server.
Figure 5-40 DHCP Settings
¾ DHCP Server - Enable or Disable the server. If you disable the Server, you must have
another DHCP server within your network, or else you must configure the IP address of the
computer manually.
¾ Start IP Address - This field specifies the first address in the IP Address pool. 192.168.1.100
is the default start IP address.
¾ End IP Address - This field specifies the last address in the IP Address pool. 192.168.1.199
is the default end IP address.
¾ Address Lease Time – It is the length of time a network user will be allowed to keep
connecting to the device with the current DHCP Address. Enter the amount of time, in minutes,
that the DHCP address will be "leased". The time range is 1~2880 minutes. The default value
is 120 minutes.
¾ Default Gateway - (Optional) Input the IP Address of the gateway.
¾ Default Domain - (Optional) Input the domain name of your network.
¾ Primary DNS - (Optional) Input the DNS IP address provided by your ISP.
¾ Secondary DNS - (Optional) You can input the IP Address of another DNS server if your ISP
provides two DNS servers.