Filter
Top Products
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide
99
¾ Disable Security- The wireless security function can be enabled or disabled. If disabled, the
wireless stations will be able to connect the Device without encryption. It is recommended
strongly that you choose one of the following options to enable security.
¾ WPA-PSK/WPA2-PSK- Select WPA based on pre-shared passphrase.
¾ PSK Password- You can enter ASCII or Hexadecimal characters.
For ASCII, the length should be between 8 and 63 characters.
For Hexadecimal, the length should be between 8 and 64 characters.
Please note that the key is case sensitive.
¾ Not Change- If you chose this option, wireless security configuration will not change.
2. Wireless settings in AP Client Router mode
Figure 5-27 Wireless Settings in AP Client Router mode
¾ SSID - The SSID of the AP your Device is going to connect to as a client. You can also use
the search function to select a SSID to join.
¾ BSSID - The BSSID of the AP your Device is going to connect to as a client. You can also use
the search function to select a BSSID to join.
¾ Region - Select your region from the pull-down list. This field specifies the region where the
wireless function of the Device can be used. It may be illegal to use the wireless function of