Filter
Top Products
IPedge
Feature Operations
IPedge UG 06/11 TOSHIBA 61
4. Set System Speed Dial to enable/disable. Default is Disable.
5. Click on the Save icon.
Long SD Numbers Up to 32 digits can be stored in one SD location. If you exceed 32 digits, the
excess digits are automatically stored in the next sequential SD location. If SD
100 contains 40 digits, then 8 of those digits would be stored in SD 101. If you
save other digits to SD101 they will over-write the eight digits automatically
stored there.
Storing Personal Speed
Dial Names
You can store names with Personal Speed Dial numbers. These names will
display as Soft Keys which can be used for dialing from the telephone LCD
directories.
Notes:
• Speed Dial locations must be assigned to your telephone by your System
Administrator before you can store names. Your System Administrator
can also associate names with Station Speed Dial numbers.
• Only the Administrator telephone can store System Speed Dial numbers.
Assign Station Speed Dial
Names
Web-based User Administration
1. Login and select Speed Dial, then select or enter the desired Speed Dial
Index and set the number and name.
2. Enter a Speed Dial location number (100~199 for personal speed dial or
200~999 for System speed dial, depending on system programming).
3. Enter the telephone number to be stored. If you normally dial a line
access code (such as 9) and/or an area code, enter the codes before the
telephone number.
4. Input the name you want to appear in the Personal SD directory (nine
characters max).
5. Click on Save icon to register the information.
Time and Date Setting
(Local)
IP telephones will display the time, day and date of the time zone of the
telephone system location it is connected to. If the IP telephone is not located
in the same time zone as the telephone system, the IP telephone can be used
to change the time, day and date of the IP Telephone to the local time zone in
which the telephone is located.
To change the Date
• From the IP telephone, dial #653 and enter YYMMDD#
Example: To set the date to March 12, 2008.
YY = Year, example 08
MM = Month, example 03
DD = Day, example 12
Note: The IP telephone date can only be changed one day before or after
the telephone system date. The day will change automatically when
the date is changed.