Filter
Top Products
IPedge
Feature Operations
42 TOSHIBA
IPedge UG 06/11
perform any Call Forward function using Enterprise Manager, Web-based
User Administration tool. Call Forward must be set prior to receiving the call.
Important! Check with your System Administrator to determine if
the system uses Basic Survivability, if yes, do not
change your station call forward settings.
The following calls to your station can be forwarded:
• Internal calls
• Auto Attendant calls
• Outside lines that ring only your station
• Transferred internal or incoming line calls
Station Call Forward
Categories
You can set Call Forward for the following categories of calls. Within these
categories, you can use five different types of Call Forward Settings (as
detailed in the next section).
•
Call Forward Any Call – Forwards any call, whether an internal call or
incoming line call.
•
Call Forward - Incoming Line – Forward incoming line calls only.
•
Call Forward Any Call - Set for Another Station – Enables you to set
forwarding of all calls for another telephone within your telephone system.
•
Call Forward - Incoming Line Set for Another Station– Enables you
to set forwarding of incoming line calls for another telephone within your
telephone system.
Notes:
• Call Forward Any Call and Call Forward-Incoming line can be set
simultaneously on a telephone. This allows incoming line calls to be
forwarded to a different destination than all of the other types of calls.
• Call Forward destinations can be set to internal destinations or an
outside telephone number.
Call Forward Settings •
Call Forward All Calls – Forwards all calls immediately.
•
Call Forward Busy/Do Not Disturb – Forwards calls immediately when
your extension is busy or in Do Not Disturb (DND) mode.
• In Tone-first systems with multiple lines, Call Forward Busy forwards calls
only when all line appearances are in use. In Voice-first systems, Call
Forward Busy forwards all calls any time your telephone is in use.
•
Call Forward - No Answer – Forwards unanswered calls after a preset
number of rings. The preset number of rings can be set on a per user
basis.
•
Call Forward Busy/Do Not Disturb/No Answer – Forwards all calls
when you are busy, in DND mode or when you don't answer a call within
a preset number of rings.
•
Call Forward Cancel – Cancels the set Call Forward feature. Notice that
each category of Call Forward has a different code for canceling.