Filter
Top Products
IPedge
The Grand Tour
IPedge UG 06/11 TOSHIBA 15
Speaker: Press to toggle the speaker ON/OFF. When red Speaker LED
is lit handsfree communications is supported.
To start a handsfree conversation; press the Speaker button, this turns
the red Speaker LED on. To terminate this call press the Speaker button
again (Speaker LED off).
During a handset conversation, press the Speaker button to start
hands-free communications (red Speaker LED on). Press the Speaker
button again to transfer the conversation back to the handset (Speaker
LED off).
Press and release the volume control bar to adjust volume levels.
Shift Key: Purple button on the IP5131 telephone. Press Shift at any
time to alternate between display of feature keys 1~10 and feature keys
11~20.
Web Browser Key: Blue button on the IP5131 telephone. Press this key
to access the web.
Navigation Key: Round button on the IP5131 telephone is a navigation
key used for moving the cursor on html pages and in the programming
screens. Center of the button is the “select” function. The arrows are
used to scroll up, down, left or right.
Spdial Press Spdial and enter 3-digit Speed dial access code. Speed dial
access codes must be setup before they can be accessed.
Redial
Press Redial to dial the last telephone number called (internal or exter-
nal).
If you have Automatic Line Selection, lift the handset first.
Cnf/Trn (Con-
ference/Trans-
fer)
Press Cnf/Trn to add internal or external parties to a conference call
(up to 8 parties).
Press
Cnf/Trn and enter a number to transfer a call to another party (on
the CIX system).
Hold Press Hold to place an internal or external call on hold.
Press
Hold Hold to place an internal or external call on Exclusive hold.
If your telephone is programmed for Automatic Hold, existing calls are
automatically placed on hold when you answer a call or make another
call.
Table 3 Fixed Button Definitions (continued)
Button Definitions