Filter
Top Products
48
(Rev. 8/04)
®
B9. Station Alerting for Aircraft Aircall Number
In a system with several digital handsets the user may wish to have
certain handsets disabled from ringing for uplink calls to the aircraft
Aircall Number. Calls to the station aircall number are unaffected by
this option. Start a Maintenance Session. Press “4” (Phone #) and then
press “2” (Aircall) followed by “+” (More). Press “1” (yes) or “2” (no)
for desired setting. This step also affects the Call Alerter Switch (CAS)
in the same manner.
B10. Direct Call Pick-Up
(This is a System Function)
This lets users answer uplink calls by simply taking the digital handset
off-hook to answer calls.
It is recommended that the Direct Call Pick-up feature be
Enabled. This feature provides maximum convenience when answer-
ing incoming calls. The number of the calling party (i.e. Caller ID) is
displayed on the handset before it is taken off-hook.
This system function can be Enabled/Disabled by starting a
Maintenance Session. Press “4” (Phone #) and then press “2” (Aircall)
followed by pressing “+” (More) twice. Press “1” (yes) or “2” (no) for
desired setting.
NOTE: If Direct Call Pick-up is enabled and the system is configured for Credit
card billing (i.e., Direct aircraft account billing is disabled for non-Cockpit
Station handsets), the user is prompted to swipe a credit card before the
ARTU will answer the incoming call.
B11. Setting the Inplane Number (Seat-to-Seat Calling)
Start a Maintenance Session. Press “4” (Phone #) and then press “1”
(Inplane). Select the desired Inplane number from the numbers listed
on the display. The current Inplane number will be highlighted.
The handset cannot receive Inplane calls until it has been assigned an
Inplane number.