Teledyne C-2000 Telephone User Manual


 
H2. Receiving a Call via the CPI
All handsets with Aircraft Alertingenabled will ring when the
assigned cell phone number is called. To answer you need only to take
any ringing handset off-hook.
H3. Remote Answer
Whenever any phone in the aircraft is ringing, (Inplane, Air/Ground,
GroundCell, or SATCOM), the air traveler can answer the call by tak-
ing a non-ringing handset off hook and pressing 9(Setup). At this
point the menu option Remote Answer->9will be highlighted indi-
cating that another phone is currently ringing in the aircraft. Press 9
(Remote Answer) to connect to the incoming call.
H4. Call Forwarding
A handset can be congured such that incoming calls (Inplane,
Air-Ground, and SATCOM) are automatically redirected to another
handset.
The user activates this feature by taking the handset off-hook and
pressing 9(Setup) -6 (Call Fwd) and then the Destination Inplane
Number.
NOTE 1: If activated, Call Forwarding is indicated with highlighted text on the
Source (“Fwd To x”) and Destination (“Fwd From y”) handsets (with
Inplane numbers “x” and “y”) on the “Services” menu (i.e. menu
displayed while handset is in bezel).
NOTE 2: If desired, more than one handset can be forwarded to another handset.
The user deactivates this feature by using any of the following options:
Option #1: Take the handset off-hook and press: 9(Setup) -6 (Call
Fwd) - Destination Inplane Number (which is highlighted on menu).
Option #2: Take the handset off-hook and press: 9(Setup) - 6
(Call Fwd) - Current Inplane Number(i.e. forward back to self).
Option #3: Call Forwarding is automatically cleared from memory
when the ARTU unit is powered down.
30
(Rev. 8/04)
®