Filter
Top Products
9-7
Spectrum24 Network Configuration
Enter the channel number in the Channel field. The first adapter configured in
the Ad Hoc network defines the channel number used in the Ad Hoc network.
Each adapter is required to use the same channel to transmit and receive data
to its peers.
Check the Send long preamble headers checkbox if the other devices in
your network are using a long preamble. Devices using Ad Hoc mode must use
the same preamble setting to interoperate. The adapter uses a long preamble
heading by default.
Info Tab
Figure 9-4. PDT 8046 NICTT Properties - Info Tab
The Info tab in NICTT provides information about the terminal, such as the version of the
driver, adaptive firmware, and hardware. It also lists the current active settings for
operating, encryption and transmit power modes. All the fields in the Info tab are read-only
and cannot be configured.