Filter
Top Products
4-11
Communications
With the above setup completed, you can use your modem connection to synchronize data
between your terminal and a host computer (see Synchronizing Data on page 4-11) or you
can connect to the Internet (see Connecting to the Internet on page 4-13).
Available Country Codes
The modem defaults to operation with US telephone networks (country code: B5). To
operate the modem with other country telephone networks, you must set the Country Code
by entering the Country of Installation command. The modem will adjust it’s operating
parameters to comply with the telephone network in the country specified.
Syntax used: +GCI=<country_code>;
Supported countries and there codes are:
Synchronizing Data
1. Tap Start - ActiveSync - Tools - Options - PC and deselect the Enable
synchronization when cradled using: check box to temporarily disable serial cable
detect before using ActiveSync.
2. Tap Start - ActiveSync - Tools - Options - PC and select the Include PC when
synchronizing remotely and connect to: check box to ensure the host computer you
wish to synchronize with is identified.
3. Tap Start - Settings - Connections tab - Connections icon.
Country Code Country Code Country Code
Austria FD or 0A Greece 46 Norway FD or 82
Belgium FD or 0F Iceland FD Portugal 8B
Brazil 16 Ireland FD or 57 Spain FD or A0
Canada 20 Italy FD or 59 Sweden FD or A5
Denmark FD or 31 Liechtenstein FD Switzerland FD or A6
Finland FD or 3C Luxembourg FD TBR-21
(Europe)
FD
France FD or 3D Mexico 73 United
Kingdom
FD or B4
Germany FD or 42 Netherlands FD or 7B United States B5
(Default)
Note: It is highly recommended that you use FD where possible. If you have trouble
connecting, use the alternate code where provided.