Filter
Top Products
1-12
PDT 8000 Series Product Reference Guide
Using the Single-Slot Cradle
To charge the terminal’s battery using the CRD8000-1000S or the CRD8000-1000M:
1. Connect the cradle to a power source.
2. Insert the terminal into the cradle. The terminal starts to charge automatically.
The terminal charge LED blinks amber to indicate that the terminal battery is charging and
turns solid amber when charging is complete. The battery usually charges in two hours or
less, but may take up to four hours to fully charge. See Charge LED Indicator on page 1-
16 for other indications.
AC Line
Cord
DC
Cable
Power
Supply
Terminal
Charge LED