Symbol Technologies PDT 8000 Series PDAs & Smartphones User Manual


 
1-15
Getting Started
Using the CHS8000-4000B
1. Connect the cradle to a power source.
2. Slide the latches on both sides of the battery up, to ensure they are in the unlock
position.
3. Insert the battery into the Spare Battery Charging slot on the back of the cradle.
Position it with the charging contacts facing down (over charging pins) and gently
press down on the battery to ensure proper contact.
4. Lock the battery into place by sliding the latches on the battery down.
The spare battery charging LED blinks amber to indicate that the battery is charging and
turns solid amber when battery is completely charged. The battery usually charges in two
hours or less, but may take up to four hours to fully charge. See Charge LED Indicator on
page 1-16 for other indications.
UNLOCK
LOCK