Symbol Technologies PDT 8000 Series PDAs & Smartphones User Manual


 
B-3
Demo Program
Scanning Data Fields
After a bar code is scanned, the following data appears in the screen:
Data displays the data encoded in the scanned bar code.
Type indicates the hex type scanned.
SRC indicates the scanner being used, and the bar code type scanned
(e.g., Code 128).
Time displays the time the bar code was scanned.
Len indicates the number of digits in the bar code.
Scanning Options
The following options are available in the Scan screen:
Scan provides an alternative to the trigger buttons on the terminal.
View displays the bar code content in a separate screen.
Params is used to change scanning parameter options, such as:
beep time (length of decode beep)
beeper frequency (tone)
LED-on time (length of time LED remains on upon decode)
Code ID (AIM, Symbol)
Wav File (sound of decode beep).
Codes selects the code types the terminal is able to decode, and sets the options
for each code type.
Cancel closes the Scan screen.