Filter
Top Products
8-5
Connections
Connecting Directly to an E-mail Server
You can set up a connection to an e-mail server to send and receive e-mail messages using
a modem or network connection and Inbox on your terminal.
Note:The ISP or network must use a POP3 e-mail server and an SMTP
gateway.
You can use multiple e-mail services to receive your messages. For each e-mail service
you intend to use, first set up and name the e-mail service. If you use the same service to
connect to different mailboxes, set up and name each mailbox connection.
Setting Up an E-mail Service
In Inbox on your terminal, tap Services, then New Service. Follow the instructions in the
New Service wizard on the screen. For an explanation of a screen, tap Start, then Help.
When finished, tap Services, then Connect to connect to your e-mail server. For more
information on using the Inbox program, see Inbox on page 5-14.
Disconnecting
Choose one of the following ways to disconnect:
• When connected via dial-up or VPN, tap the Connection icon on your
navigation bar, then tap End.
• When connected via the cradle, remove your terminal from the cradle.
• When connected via a serial connection, disconnect the terminal and the host
computer.
• When connected via Infrared, move the terminal away from the host computer.