Filter
Top Products
Useful InformationAnswering System
Preparation
87
If the Following Appear on Your Display...
Telephone System
Denied
• The Room Monitor feature is turned off on the
destination handset or base unit and cannot be
monitored (p. 56).
• The called handset was on the base unit. The
handset must be off the base unit to be monitored.
Save error
• The entered password was wrong in programming
the dial lock. Enter the correct password.
Dial locked
• The dial lock is turned on. If necessary, turn the dial
lock off (p. 63).
Invalid.
Please register
to the base unit
• The handset you tried to call has not been registered
to the base unit. Register the handset (p. 84, steps 5
and 6).
Error!!
4 handsets have
already been
registered.
• 4 handsets have already been registered to the base
unit. To cancel a handset’s registration, see page 83.
• You may have registered one of your handsets to
another base unit without deleting its registration to
this base unit. Erase the handset’s registration from
the base unit.
For the KX-TG5240AL base unit:
(1) Press and hold [LOCATOR/INTERCOM/
TRANSFER] for 3 seconds, and
(2) Press and hold the handset number [1]
() to
[4]
()
that you do not want for 5 seconds. A long beep
sounds, then the handset number is erased.
Display message Cause & Remedy
TG5240AL.fm Page 87 Friday, June 11, 2004 5:22 PM