Filter
Top Products
Useful InformationAnswering SystemTelephone System
23
Programmable Settings
Preparation
Line Mode
The line mode is preset to “B” and generally should not be adjusted. If “
”
is
not displayed on the handset properly, the line mode selection is incorrect. Set line
mode to
“A”
.
Dialling Mode
If the unit cannot make an outside call, the dialling mode may be incorrect. Set the
dialling mode to “Tone”.
1 Press [MENU].
2 Scroll to “Initial setting” by pressing
[d] or [B], then press the soft key ( ).
3 Scroll to “Set tel line” by pressing [d] or
[B], then press the soft key ( ).
4 Scroll to “Set line mode” by pressing [d]
or [B], then press the soft key ( ).
5 Select “A” or “B” by pressing [d] or [B].
6 Press the soft key ( ), then press [OFF].
1 Press [MENU].
2 Scroll to “Initial setting” by pressing
[d] or [B], then press the soft key ( ).
3 Scroll to “Set tel line” by pressing [d] or
[B], then press the soft key ( ).
4 Press the soft key ( ) at “Set dial
mode”.
5 Select “Tone” by pressing [d] or [B].
6 Press the soft key ( ), then press [OFF].
Handset
IN USE
SELECT
Initial setting
SELECT
Set tel line
SELECT
Set line mode
Set line mode
:B
SAVE
Handset
SELECT
Initial setting
SELECT
Set tel line
SELECT
Set dial mode
Set dial mode
:Tone
SAVE
TG5240AL.fm Page 23 Friday, June 11, 2004 5:22 PM