Filter
Top Products
10
Displays
Handset
1 “ ” functions as follows.
2 “SP” is shown when you are using the handset speakerphone.
3 “ ” indicates Voice Enhancer mode is on (p. 31).
4 “PRIVACY” indicates Call Privacy mode is on (p. 58). Other extension users
cannot join your conversation.
5 The battery icon indicates battery strength (p. 13).
6 The extension number of your handset is displayed if it has been registered to
the base unit (p. 3, 83, 84).
7 The display shows the dialled number, call status, programming options, phone
book items, Caller ID information, etc.
8 The icons on the bottom line indicate the functions of the corresponding soft
keys which are located directly below the display (p. 9).
Ex. The soft key below “C” (phone book icon) is used when storing or viewing
phone book items (p. 41, 43).
9 “D” (extension icon) and extension numbers are displayed (ex. base unit=“0”,
handset 1= “1”)
a) during an intercom call (p. 49) or a conference call (p. 55);
b) while monitoring a room (p. 57).
Off (invisible) The line is free.
On The line is being used.
Flashing
A call is on hold on the handset or base unit, or the
Answering System is answering a call (p. 66).
Flashing rapidly A call is being received.
SP
I
PRIVACY
1
10 missed calls
D01
IN USE
[
1
]
CID PLAY
C
1234 56
7
8
9
IN USE
VE
TG5240AL.fm Page 10 Friday, June 11, 2004 5:22 PM