Filter
Top Products
Useful InformationAnswering System
Preparation
57
Room Monitor
Telephone System
To monitor with
The unit to be monitored must not be in use and the handset to be monitored
must be off the base unit.
• The monitored user can stop being monitored by:
— on the handset, press [OFF] or place the handset on the base unit.
— on the base unit, press [LOCATOR/INTERCOM/TRANSFER] or
[SP-PHONE].
• “Room monitor” is also displayed on the monitored handset.
• While the base unit is monitoring or being monitored, the LOCATOR/INTERCOM/
TRANSFER indicator light flashes and the SP-PHONE indicator lights.
To monitor with
The handset to be monitored must not be in use and off the base unit.
• If the Room Monitor feature of the destination handset is off or the handset is on
the base unit, busy tones will sound.
1 Press [HOLD/INTERCOM], then press the soft key ( ).
2 To call the base unit, press [0].
To call another handset, press its extension
number ([1] to [4]).
• To monitor from the speaker, press [s]. If the
handset is placed on the base unit, monitoring
will be stopped. Accessory handset users (p. 3)
can place the handset on the charger and
continue monitoring. To switch back to the
receiver, press
[C].
3 To end monitoring, press [OFF].
1 Press [LOCATOR/INTERCOM/TRANSFER], then press [MUTE].
• The LOCATOR/INTERCOM/TRANSFER indicator flashes.
2 To call the handset, press its extension number [1]
( ) to
[4]
()
.
3 To end monitoring, press [LOCATOR/INTERCOM/TRANSFER] or
[SP-PHONE].
• The indicator light goes out.
Handset
MONITOR
Press extension#
for room monitor
1-4=Handset
0=Base
Room monitor
00-00-05
D01
Base Unit
TG5240AL.fm Page 57 Friday, June 11, 2004 5:22 PM