Filter
Top Products
Useful InformationAnswering SystemTelephone System
13
Installation
Preparation
Installing the Battery in the Handset
Insert the battery (1), and press it down until it snaps into the compartment (2).
Close the cover.
To replace the battery:
Press the notch on the cover firmly and slide it as
indicated by the arrow. Replace the old battery with a new
one (p. 14). Close the cover and charge the handset for 6
hours.
Battery Charge
Place the handset on the base unit for 6 hours
before initial use.
• The unit beeps once, the CHARGE indicator lights and
“Charging” is displayed.
• When the battery is fully charged, “Charge
completed” is displayed if there are no new calls in the
Caller List.
Battery strength
You can confirm the battery
strength on the handset
display.
Battery strength is indicated
by the icons shown in the
chart to the right.
Display prompt Battery strength
1 Fully charged
2 Medium
3 Low
(flashing) Needs to be recharged.
4 Discharged
1
2
CHARGE Indicato
r
3
TG5240AL.fm Page 13 Friday, June 11, 2004 5:22 PM