Filter
Top Products
Subscriber’s Manual
93
4. Select the desired message type.
to notify all messages.
to notify urgent messages.
5. Select when the device will be
used for message notification.
for schedule (notification is
sent each time a message is
received, but only during the times
programmed by the System
Administrator).
for continuously.
for not use (notification is
never sent).
Assigning Notification Numbers
A maximum of 3 telephone or beeper
numbers can be set for message
notification. Use the number keys 0 to 9,
and the Beeper Callback Number Display
Entry Code [X] to make these
assignments.
When the Beeper Callback No. Entry
Code is added at the end of a beeper
number, the VPS will ask the caller to
enter the callback number that will be
displayed on the beeper. System
Programming determines if the Callback
Number Entry is to be entered before,
after, or without the message.
It is also possible to have the caller select
whether or not he or she wishes to enter
a callback number. The System Manager
must authorize the use of the Beeper
Callback No. Entry Code.
1. Log in to the Main Menu.
• See 7.1 Logging in to the
Message Manager's Mailbox.
2.
3.
to assign a telephone/beeper
number.
4. to change the first telephone
number.
to change the second
telephone number.
to change the third telephone
number.
5. to accept.
6. Enter the telephone number.
7. to accept.
8. to change the telephone
number.
to accept.
to review.
to add more digits.
to insert a pause.
to insert a wait for dial tone.
to insert a beeper display
command.
9. to be notified by telephone.
to be notified by beeper.
1
2
1
2
3
2
3
1
2
3
1
2
1
2
3
4
5
6
7
1
2