Filter
Top Products
Subscriber’s Manual
60
5.16 Assigning Your
Telephone Numbers
for Remote Automatic
Log-in and Toll Saver
When logging in to your mailbox remotely
(i.e., from an outside telephone) to listen
to your messages, the Remote Automatic
Log-in (see 3.4 Remote Access) and Toll
Saver (see Glossary) features identify
you by recognizing your telephone
number. In order to use these features,
you must first store the telephone
numbers that you will use to access your
mailbox remotely.
Automatic Log-in and Toll Saver are not
available with certain PBXs and may be
disabled by the System Administrator or
System Manager for your mailbox.
1. Log in to your mailbox.
• See 2.1 Logging in to Your
Mailbox if necessary.
2.
3. to change telephone number
1.
to change telephone number
2.
• If you have already set a
telephone number and wish to
change it, press [1] after
selecting telephone number 1
or 2.
4. Enter your outside telephone
number (20 digits max.) including
area code if needed.
5. to accept.
6. Go on-hook.
Note
• In order for Remote Automatic Log-in
and Toll Saver to function properly,
your PBX must be able to receive
Caller ID information. For more
information, consult your System
Administrator or System Manager.
• Remote Automatic Log-in and Toll
Saver are only available with
Panasonic KX-T series PBXs using
APT or DPT Integration. For more
information, consult your System
Administrator or System Manager.
• The System Administrator or the
System Manager must enable
Automatic Log-in and Toll Saver for
your mailbox before it can be used.
3
7
1
2
2