Filter
Top Products
Subscriber’s Manual
115
A2.8 Two-way Recording (TWR) Button Assignment
For the Two-way Recording feature to work at an extension, the extension must have
a TWR button. This button must either be a DSS/BLF or CO button with a lamp. Follow
the procedure below to assign a TWR button on an extension. (This is station level
programming and should be done at each individual telephone.) PC programming is
also available (see A2.12 Button Assignment via PC Programming).
1. Enter Personal Programming:
While on-hook, press the PROGRAM button.
(Display changes to PT-PGM Mode.)
2. Press the desired Flexible (CO or DSS/BLF) button that you want to assign as the
TWR button.
3. Press [90].
Screen output: 2WAY-REC-
4. Enter a Voice Mail floating extension number.
Screen output: 2WAY-REC- _ _ _
(_ _ _ = The Voice Mail floating extension number you entered).
5. Press the STORE button.
6. Press the PROGRAM button or lift the handset to exit the Personal Programming
mode.
7. Repeat these steps for each telephone.
Conditions: This button must be a flexible (CO or DSS/BLF) button to be
programmed as a TWR button. When all Voice Mail ports
are busy and this key is pressed, the user will hear a
warning tone.