Filter
Top Products
Subscriber’s Manual
110
A2 KX-TDA and KX-TAW Series Feature
Programming for DPT Integration
The following VPS features are functional on any KX-T7xxx proprietary telephone that
is connected to the PBX.
Programming procedures and availability may vary by PBX model, software
version, etc. Refer to the documentation included with the PBX or consult your
dealer for more information.
A2.1 Live Call Screening (LCS) Programming
LCS notifies subscribers when messages are being recorded in their mailboxes. 2
notification methods are available: hands-free or private. Hands-free allows the user to
monitor the message as it is being recorded through the speakerphone and, if desired,
intercept the call by lifting the handset. Private mode notifies the user (by sounding a
tone) when a message is being recorded. By pressing the LCS button, the user can
monitor the message and intercept the call by going off-hook. System Programming
also determines whether the VPS continues to record after the user intercepts the call.
A2.2 Live Call Screening Password Assignment
To allow the Live Call Screening feature to work at an extension, the extension must
have the LCS button lit. To light this button, press the LCS button, then enter the
password. This password prevents others from activating the LCS feature and listening
to the messages as they are being left. (It is not necessary to enter Personal
Programming to activate this feature.) PC programming may also be used to program
this feature (see A2.6 Live Call Screening Assignment via PC Programming).
Note
• For KX-TDA and KX-TAW series PBXs, the term "Live Call Screening Password" used in
this section indicates the Extension PIN (Personal Identification Number).
1. Lift the handset or press the SP-PHONE button.
2. Enter [ 799].
3. Enter [1].
Screen output: Enter PIN
4. Enter a password (max. 10 digits), then press [#].
Screen output: Enter PIN Again
5. Re-enter the password, then press [#].
You will hear a confirmation tone, then a dial tone.
Screen output: PIN set
6. Hang up or press the SP-PHONE button.