Filter
Top Products
Subscriber’s Manual
117
A2.10 One-touch Two-way Transfer (One-touch TWT)
Button Assignment
For the One-touch Two-way Transfer feature to work at an extension, the extension
must have a One-touch TWT button on it. This button must either be a DSS/BLF or CO
button with a lamp. Follow the procedure below to assign a One-touch TWT button on
an extension. (This is station level programming and should be done at each individual
telephone.) PC programming is also available (see A2.12 Button Assignment via PC
Programming).
1. Enter Personal Programming:
While on-hook, press the PROGRAM button.
(Display changes to PT-PGM Mode.)
2. Press the desired Flexible (CO or DSS/BLF) button you want to assign as the
One-Touch TWT button.
3. Press [91].
Screen output: 2WAY-Xfr-
4. Enter a Voice Mail floating extension number.
Screen output: 2WAY-Xfr- _ _ _
(_ _ _ = The Voice Mail floating extension number you entered)
.
5. Press [#].
6. Enter a Transferred extension number.
Screen output: 2WAY-Xfr-_ _ _#_ _ _
(#_ _ _ = The Transferred extension number you entered)
.
7. Press the STORE button.
8. Press the PROGRAM button or lift the handset to exit the Personal Programming
mode.
9. Repeat these steps for each telephone.
Conditions: This button must be a flexible (CO or DSS/BLF) button to be
programmed as a One-touch TWT button. When all Voice
Mail ports are busy and this key is pressed, the user will
hear a warning tone.