Filter
Top Products
Subscriber’s Manual
135
A3.7 Live Call Screening Button Assignment
For the Live Call Screening feature to work at an extension, the extension must have
an LCS button lit at the time of the message reception. This key must either be a DSS/
BLF or CO key with a lamp. Follow the procedure below to assign an LCS button on
an extension. (This item should be programmed by each extension user through
Personal Programming.)
PC programming is also available for KX-TD500 and KX-TA824 users (see A3.12
Button Assignment via PC Programming).
1. Enter PITS Programming:
a. While on-hook, press the PROGRAM button or set the MEMORY switch to
"PROGRAM".
b. Enter [99]. (This step is not needed for KX-TA624 and KX-TA824.) The display
changes to PT-PGM Mode.
2. Press the desired FLEXIBLE (CO or DSS/BLF) button you want to assign as the
LCS button.
3. Enter: [92].
Screen output: LCS
4. Press the STORE button.
5. To exit the Personal Programming mode, press the PROGRAM button or set the
MEMORY switch to "SET".
6. Repeat these steps for each telephone.