Filter
Top Products
Subscriber’s Manual
119
A2.12 Button Assignment via PC Programming
KX-TDA and KX-TAW series PBX users can assign buttons for Live Call Screening
(LCS), Two-way Recording (TWR), Two-way Transfer (TWT), and Voice Mail Transfer
(VTR) via PC Programming. Follow the procedure below to assign each button.
1. Go to "Extension-Wired Extension-Flexible Key" screen.
2. Select "Extension Number / Name" for which you want to program.
3. Assign the desired Key Type to the Key Location you wish to program. When "Two-
way Record", "Two-way Transfer" or "Voice Mail Transfer" is selected, enter the VM
Port floating extension number in "Ext No. or Floating Ext No.". When "Two-way
Transfer" is selected, you can enter the extension number of a desired destination
under "Extension Number of Mailbox". If no extension number is assigned, you will
have to enter an extension number each time you use the Two-way Transfer
feature.
4. Repeat these steps for each extension.
5. Click "Apply" to save the changed data.