Filter
Top Products
Tungsten™ T5 Handheld 104
CHAPTER 5 Moving and Managing Info Between Your Handheld and Your Computer
0
1 Turn on Drive Mode:
a. Go to Applications
and select
Drive Mode .
b. Select Turn Drive Mode On.
2 Prepare your handheld and your computer:
a. Connect the USB sync cable to the USB port on the back of the computer,
and then insert the other end into your handheld.
b. Connect the AC charger cable to the USB sync cable, and then plug it into a
power outlet.
Continued
Tip
If you are formatting your
handheld’s internal drive
or an expansion card
while in Drive Mode, be
sure to select the file
system type FAT—do not
select FAT32 or any other
file system type. If you
select any other file
system type, your
handheld cannot
recognize the information
on the internal drive or
the card.