Filter
Top Products
Page 161 Setting Preferences for Your Handheld
4. Repeat steps 2 and 3 until the login script is complete.
5. Tap OK.
Wait For
Tells your handheld to wait for specific characters
from the TCP/IP server before executing the next
command.
Wait For
Prompt
Detects a challenge-response prompt coming from
the server and then displays the dynamically
generated challenge value. You then enter the
challenge value into your token card, which in turn
generates a response value for you to enter on your
handheld. This command takes two arguments,
separated by a vertical bar (|) on the input line.
Send
Transmits specific characters to the TCP/IP server
to which you are connecting.
Send CR
Transmits a carriage return or LF character to the
TCP/IP server to which you are connecting.
Send User
ID
Transmits the User ID information entered in the
User ID field of the Network Preferences screen.
Send
Password
Transmits the password entered in the Password
field of the Network Preferences screen. If you did
not enter a password, this command prompts you
to enter one. The Password command is usually
followed by a Send CR command.
Delay
Tells your handheld to wait a specific number of
seconds before executing the next command in the
login script.
Get IP
Reads an IP address and uses it as the IP address
for your handheld. This command is used with
SLIP connections.
Prompt
Opens a dialog box and prompts you to enter text
of some kind (for example, a password or a
security code).
End
Identifies the last line in the login script.