Palm m100 PDAs & Smartphones User Manual


 
Page 147 Setting Preferences for Your Handheld
General preferences
The General Preferences screen enables you to set the auto shutoff
interval, the sounds for your handheld, and the beam receive feature.
Auto-off delay
Your handheld has an automatic shutoff feature that turns off the
power after a period of inactivity. This feature helps conserve battery
power in case you forget to turn off your handheld. If you find that
your handheld shuts itself off before you finish reviewing the
information on the screen, you should increase the time setting of the
automatic shutoff feature.
To set the Auto-off delay:
1. Tap the Auto-off after pick list.
2. Tap the setting you want to use for the automatic shutoff feature:
30 seconds, 1 minute, 2 minutes, or 3 minutes.
System, alarm, and game sounds
The System, Alarm, and Game Sound settings enable you to turn the
sounds on or off, and to adjust the volume level.
To set the system and alarm sounds:
1. Tap the System Sound pick list and select the sound level.
Note:
When you turn off the System Sounds, you also turn off
the “chime” tones associated with the HotSync operation.
2. Tap the Alarm Sound pick list and select the sound level.
3. Tap the Game Sound pick list and select the sound level.
Note:
The Game Sound setting works only with games that are
programmed to respond to this setting. Older games
typically do not respond to this setting.