Filter
Top Products
80 Chapter 8 Track your incoming calls
P0937240 02
If you do not remember your Call Log password, programming from Unified Manager can delete
the password. For more information about programming using Unified Manager, see the Business
Communications Manager Programming Operations Guide.
Change your Call Log password
1 Press ≤
¥¡Þ
. The display shows
Old passwrd:
.
2 Enter your old password. The display shows
New passwrd:
.
3 Enter your new four-digit password. The display shows
Repeat New:
.
4 Re-enter your password. The display shows
Password changed
to confirm the change.
Delete an assigned password
1 Press ≤
¥¡Þ
. The display shows
Old passwrd:
.
2 Enter your old password. The display shows
New passwrd:
.
3 Press ≥ or
OK
. The display shows
No pswd assigned
, to confirm the change.
Program a telephone to log calls automatically
Your installer can program each telephone to automatically log calls coming in on a line.
The caller's name is not available.
The caller’s number is not available.
_ indicates a new item.
ø
indicates that the call was answered.
¤
indicates a long distance call.
/
indicates the stored number was trimmed to its final 11 digits.
Press
Ã
or
MORE
to show additional information about
the call.
One or more log entries are deleted by the Autobumping feature
while you are viewing at the Call Log.
1:Unknown name
1:Unknown number
12:KATE SMITH
NEXT ERASE MORE
12øKATE SMITH
NEXT ERASE MORE
12¤KATE SMITH
NEXT ERASE MORE
49/1234567890123
NEXT ERASE MORE
Call(s) bumped