Filter
Top Products
Chapter 3 Make a call 45
Telephone Features Programming Guide
Cancel Ring Again
Press ≤£¤ to cancel a Ring Again request.
Message
When using Priority Call and Ring Again don’t work, you can leave a message on the person’s
display. For more information, refer to “Messages” on page 71.
Create a Conference Call
You can talk to two people at the same time.
1 Make sure you have two calls, one active and one on hold.
2 Press ≤‹.
3 Press the held line. (This action is automatic on the T7100 telephone.)
You can create a conference when you are on a call:
1 Put the call on hold. (This action is not necessary when the Automatic Hold feature is available
on your system.)
2 Make a second call.
3 Press ≤‹.
4 Press the held line.
Only the person who established the conference can use the procedures described in this section.
Disconnect one party
You can disconnect one party from a conference and continue talking to the other.
You cannot use Ring Again on your current call. You can use
Ring Again while you have a busy signal on an internal call or
line pool request, or while an internal call is ringing.
Press
YES
to use Ring Again. Press
NO
if you select to send a
message.
Note: You can create a conference by releasing privacy on a call. See “Turn
Privacy on or off for a call” on page 96.
Can't ring again
Ring Again?
YES NO EXIT