Filter
Top Products
122 Chapter 14 Portable telephone and handset features
P0937240 02
Problems with lost connections are rare, but if you notice an increase in occurrences, your base
stations may need to be moved or reprogrammed. Contact your installer to change the base station
configuration. (In the U.S. you need to obtain UTAM Inc. approval before making changes to the
base station configuration.) For more information, refer to Business Communications Manager
Programming Operations Guide.
Portable telephone features
It is possible to use many of the same system features available to a Business Communications
Manager telephone on your portable telephone. The table below shows the features available for
use on a portable telephone. For more information about features and the special codes required to
use them, refer to the feature card that came with your portable telephone. Table 9 shows the
features available to a portable telephone. See “Features available to a portable telephones in the
system” on page 122.
Note: If you try to send a message from a desk telephone to a portable telephone,
the display of the desk telephone shows
CanÕt send msg
.
Table 9 Features available to a portable telephones in the system
Feature Description
Call Forward Send calls to another telephone in your system. The display does not indicate
that calls are being forwarded. Hunt Group calls override all Call Forward
features. A Hunt Group extension can be a Call Forward destination.
Call Information The display shows the name or extension of an internal caller. If your system is
equipped to receive CLASS information (Caller ID), the external call information
appears on the display.
Call Park Park a call.
Call Park Retrieval Retrieve a parked call.
Cancel Call Forward Cancel the Call Forward feature, where calls are automatically sent to another
telephone in the system.
Conference Create a three-way call.
Directed Call Pickup Answer any telephone that is ringing in the system.
Group Pickup Answer a call ringing on another set within the same pickup group.
Host system signaling Use link and pause.
Line Pool Use line pools the same way a desk telephone does.
Mute Prevent other callers from hearing you. Also, you can mute incoming calls from
ringing on a portable telephone.
Page Page an individual telephone, several telephones, external speakers, or the
entire system. A Hunt Group extension cannot be in a page zone.
Pause Program an external autodial sequence to insert a 1.5 second delay.
Prime line On your portable, this may be either an Intercom Line, an Assigned Line or a
Line Pool.
Privacy In programming, change the privacy setting for an external line assigned to the
portable. This does not give the ability to change the privacy setting on a call by
call basis.
Release End a call or programming session.