Filter
Top Products
Chapter 12 System features 105
Telephone Features Programming Guide
Direct-dial calls to a direct-dial telephone ring at the extra dial telephone when you enter the
Ringing service feature code (≤°‡⁄) at that direct dial telephone. The installer assigns the
extra dial telephone. Note that only the extra dial telephone is activated, not the actual Ringing
service (unless that direct-dial telephone is a control telephone).
User passwords
User passwords prevent unauthorized or accidental changes to your system. There are two types of
user password: Registration and Call Log.
Registration password
The Registration password controls the registration of companion portables to the Business
Communications Manager system. For more information see the Business Communications
Manager Programming Operations Guide.
Log password
If a person does not remember their Call Log password, you can clear the previously assigned
password in programming. The person can enter a new password from their telephone.
You need to start a Unified Manager session to program this feature. For more information about
programming using Unified Manager, see the Business Communications Manager Programming
Operations Guide.
Special telephones
You can dedicate telephones to serve special functions such as:
• Direct dial
• Hotline
• Control
Direct dial
You can reach the direct dial telephone by dialing a single digit. The direct dial telephone is
normally in a central location, such as an attendant’s desk. You can have up to five direct dial
telephones for your system. The direct dial telephone is normally the prime telephone or the
central answering position (CAP).
Note: The system provides six service schedules: Night, Lunch, Evening, Sched
4, Sched 5, and Sched 6. Your installer can change these names to meet your
business requirements.