Filter
Top Products
108 Chapter 12 System features
P0937240 02
Your installer can program the auxiliary ringer to start ringing for incoming lines as part of
Ringing Service.
Host System dialing signals
You can access host systems, such as private branch exchanges (PBX) from the system by using
host system signaling features (known as end-to-end signaling). These features either send a
special signal to the host system or allow you to program delays required by host systems in
external autodial or speed dial sequences.
Link
If you connect the system to a private branch exchange (PBX), you can use a Link signal to access
special features. On some telephones, Link is called FLASH.
You can include the Link signal as part of a longer stored sequence on an external autodial button
or in a speed dial code. The Link symbol (
Û
) uses two of the 24 spaces in a dialing sequence.
Prevent a telephone from using Link
You can limit the use of Link on individual telephones. You need to start a Unified Manager
session to program this feature. For more information about programming using Unified Manager,
see the Business Communications Manager Programming Operations Guide.
Pause
The Pause feature enters a 1.5 second delay in a dialing sequence on an external line. The use of
this feature is often required for signaling remote devices, such as answering machines, or when
reaching through to PBX features or host systems.
You can program more than one pause in an external autodial or speed dial sequence.
The Pause symbol (
Ý
) uses one of the 24 spaces in a dialing sequence.
For pulse dialing, • inserts a 1.5 second pause into the dialing sequence.
Long Tones
The Long Tones feature allows you to control the length of a tone to signal devices such as fax or
answering machines which require tones longer than the standard 120 milliseconds.
1 While on a call, press ≤°‚°.
Note: If you connect the system to a private branch exchange (PBX), you can
program Link on a memory button for one-touch access.