Filter
Top Products
137
Telephone Features Programming Guide
Appendix B
Common display prompts and error messages
The following display prompts and error messages can appear when using a telephone connected
to Business Communications Manager.
Programming is busy, or the feature you are trying to use is not
compatible with the configuration of the telephone or line.
You are trying to use a feature, but do not have access to it under
administration.
You took more than 15 seconds to press a button in response to a
display.
You entered the feature code for an application that is disabled.
You entered an invalid feature code.
You tried to use a feature that is currently not available from your
system.
You cannot use the feature you selected because your telephone is
locked. See “Set lock” on page 107.
Press £ or press
VIEWâ
or
áVIEW
to view a number that is too long
to fit on the display. Press
OK
when you have finished.
This indicates a long distance call. (May be available with Call
Display services.)
You are receiving an internal call from extension239 forwarded by
extension221, or you have an Answer button for extension221 and
an internal call from 239 is ringing on 221.
You are connected to an internal call. Press
TRANSFR
to transfer the
call.
You are receiving a call from extension 221.
A
ccess denied
D
enied in admin
F
eature timeout
Inactive feature
Invalid code
N
ot available
S
et locked
1234567890123...
VIEWâ OK
¤
2
39>221
2
21
T
RANSFR
2
21 calling