Filter
Top Products
Chapter 3 Make a call 47
Telephone Features Programming Guide
Split a conference
You can speak with one caller while the other call is on hold. You can switch between calls using
≥.
On a T7208, T7310, T7316 or M7324(N) telephone:
1 Press the line button of the caller with whom you want to speak. The other call is automatically
put on hold.
2 Press ≤‹to re-establish the conference.
On a T7100 telephone:
1 Press ≤£‹. The first call is put on hold.
2 Press ≥ to switch between calls.
3 Press ≤‹ to re-establish the conference.
Leave a conference call
You can remove yourself from a conference, and connect the other two callers.
Enter the Transfer feature code ≤‡‚.
When you remove yourself from a conference using the Transfer feature, and both calls are from
outside your system, one of the calls must have come to you on a disconnect supervised line, or the
call disconnects.
You are trying to add a fourth party to your conference call, or to
join two conferences together. Release one call from the
conference before adding another, or keep the two conferences
separate.
You have tried to make a conference call, but your system is
handling its maximum number of conference calls.
You are on a conference with the two lines or telephones shown.
You can drop out of the conference and leave the other two
parties connected (Unsupervised Conference) by pressing
TRANSFR
or entering the Transfer feature code.
You have activated the Conference feature with one call active
and another on hold. Press the held line to bring that person into
the conference.
For other displays, see Appendix B, “Common display prompts and error messages,” on
page 137.
3 parties only
Conference busy
Line001 221
TRANSFR
Press held line