Filter
Top Products
40 Chapter 3 Make a call
P0937240 02
You have dialed a number, but the least expensive route
programmed for the system is busy. Unless you release the call,
the number goes through on a more expensive route.
The last number you dialed or the number you saved for Saved
Number Redial was a speed dial number that displayed a name
instead of the number. You dialed the number correctly, but it is
not visible.
You have tried to use another person’s private line.
Enter the digits of the number you want to dial.
You have not dialed an external telephone number since the last
power interruption or system reset.
Either you have no prime line or your prime line is busy. Select a
line manually before dialing.
You have entered the number of a telephone that is not in
service.
The telephone you have called is on another call. Press
LATER
to
use the Ring Again or Message features.
System programming has a restriction configured for the call
you are trying to make. A possible reason is time-of-day
restrictions for some calls.
Press
YES
to use Ring Again. Press
NO
to send a message. See
“Messages” on page 71 and “Turn on Ring Again” on page 44.
Either you have no prime line, or the prime line is in use, or the
line programmed for an autodial number, speed dial number, or
Hotline is in use. Select a line and dial again.
Press
YES
to send a message. See Messages.
Expensive route
Hidden number
Line denied
Line061
TRANSFR
No last number
No line selected
Not in service
On another call
LATER
Restricted call
Ring Again?
YES NO EXIT
Select a line
Send message?
YES NO