Filter
Top Products
Chapter 8 Track your incoming calls 79
Telephone Features Programming Guide
Erase log items
You must erase log items that you have read, to make space for new items in your log.
1 Display the item you want to erase.
2 Press ≥ or
ERASE
.
3 Press ® to exit.
If you accidentally erase an item, you can retrieve the item.
1 Press ≥ or
UNDO
after accidentally erasing an item.
2 Press ® to exit.
Make a call using Call Log
You can place calls from within your Call Log. The number stored for a call can vary depending on
the type of call. For example, if the call came from a Centrex or PBX system, you can trim the first
few numbers before you make the call. If the number you want to call is long distance, or if you
want to use a line pool, you may need to add numbers.
To place a call:
1 Display the log item for the call you want to place.
2 Display the related telephone number.
3 Press √ or
TRIM,
one time for every digit that you want to remove.
4 Dial any additional digits required.
5 Press an external line or line pool button.
6 Lift the handset or press Handsfree.
Create a password to your Call Log
To access your Call Log through a password:
1 Press ≤
¥¡Þ
. The displays shows
New passwrd:
.
2 Enter your four-digit password. The display shows
Repeat New:
.
3 Re-enter your four-digit password. The display shows
Password changed
, to confirm the
change.
To enter Call Log using a password:
1 Press ≤
¡ÚÛ
to enter Call Log. If you have programmed a password, the display shows
Password:
.
2 Enter your four-digit password.