Filter
Top Products
93
Appendix B: WLAN Application Gateway 2246
Configuring the Telephone Line
Each WLAN Handset 2210/2211 that uses the application’s features must be configured with its
line number and MAC address. The name and extension number of the WLAN Handset 2210/
2211 user can be entered. Obtain this information from the WLAN Handset 2210/2211 Planning
Worksheet. See Planning Worksheet for WLAN Handsets 2210/2211 on page 106.
The WLAN Handsets 2210/2211 require special configuration. This can include configuring
options on the DHCP server or on the WLAN Handset 2210/2211 to allow it to communicate with
the WLAN Application Gateway 2246. Be sure these setting are correct. Refer to Configuring the
WLAN Handsets 2210/2211 on page 60 for more information.
The system does not allow the same WLAN Handset 2210/2211 to register to two different lines.
Use Esc to cancel any unwanted transaction.
Follow the steps to configure the telephone lines for the application.
Configuring a telephone line:
1 From the NetLink OAI System screen, select Telephone Line Configuration and press
Enter.
The Telephone Line Configuration screen appears. See Figure 24.
Figure 24 Telephone Line configuration
2 Use the arrow keys to navigate to the Name and Extension fields.
3 Enter the associated data for the wireless handsets.