Filter
Top Products
52
WLAN IP Telephony Manager 2245 configuration
Changing the password
1 Select Change Password from the NetLink SVP-II System menu.
The Change Password screen appears. See Figure 6.
Figure 6 Change Password screen
2 Enter the old password.
3 Enter the new password.
The password parameters are as follows:
• must be more than four characters in length
• first character must be a letter
• other characters can be letters or numbers
• dashes, spaces, and punctuation marks are not allowed (alphanumeric only)
4 Confirm the new password.
5 Select Set Password and press Enter. Alternatively, press the S key on the keyboard.
6 Reset the WLAN IP Telephony Manager 2245 in order to save the configuration parameters.
Follow the steps in “Saving the configuration” on page 53 to save the configuration.
Tips: Record the password and keep it in a safe place. If the password is forgotten, contact
Nortel Networks for assistance.