Filter
Top Products
46
WLAN IP Telephony Manager 2245 configuration
— Bits per second: 9600
— Data bits: 8
— Parity: None
— Stop bits: 1
— Flow control: None
Note: If using Windows 2000, Service Pack 2 must be installed to enable the use of
HyperTerminal™.
3 Press Enter to display the login screen.
4 Enter the default login name (admin) and the default password (admin).
Programming note: The login name and password are case-sensitive.
The NetLink SVP-II System menu appears. See
NetLink SVP-II System menu on page 47.
Connecting through a Telnet session
1 Run a Telnet session to the IP address of the WLAN IP Telephony Manager 2245.
2 Enter the login name and the password.
Programming note: The login name and password are case-sensitive.
The NetLink SVP-II System menu appears. See NetLink SVP-II System menu on page 47.