Filter
Top Products
Preface 19
Installation and Configuration Guide
Nortel Networks WLAN Handsets 2210/2211
Each of the WLAN Handsets 2210/2211 has a user guide that explains the specific feature access
for the handsets. Information about using the features of the WLAN Handsets 2210/2211 is
contained in the Nortel Networks WLAN Handset 2210/2211 User Guide.
In this document, the following handsets are referred to generically as “WLAN handsets”:
• Nortel Networks WLAN Handset 2210
• Nortel Networks WLAN Handset 2211
The WLAN Handsets 2210/2211 are very similar. The differences are the following:
• The WLAN Handset 2211 is slightly larger and more rugged than the WLAN IP Handset
2210. It is more suitable in an environment where it might be knocked or bumped (for
example, in a warehouse). The WLAN Handset 2210 is sleeker, smaller, and lighter and is
more suitable for an office-type environment.
• The WLAN Handset 2211 has a slightly larger battery pack, although the battery life is the
same for both models.
• The WLAN Handset 2211 supports the Push-To-Talk (PTT) feature. PTT is not available on
the WLAN Handset 2210.
• The WLAN Handset 2210 does not have an adjustable ringer volume.
IP telephones
This document references Nortel Networks IP Phone 2004. The IP Phone 2004 has a user card that
explains the buttons on the device, including the
Feature button, which is a softkey located under
the display on the phone. The Telephone Feature User Guide can be used with this telephone, as
most Business Communications Manager (BCM) features can be accessed from this telephone.
The IP Phone 2004 also has a display menu that provides quick access to listed features.
The WLAN Handsets 2210/2211 have a separate feature card that provides a quick reference for
accessing the system through the handset. The card also explains how to access the BCM features
allowed by the system. Features can be accessed either by entering the code on the dialpad or by
using the menu on the handset display.
Information about configuring IP telephones is contained in the IP Telephony Configuration
Guide.
plain Courier
text
Indicates command syntax and system output, for example, prompts
and system messages.
Example:
Set Trap Monitor Filters
FEATURE
HOLD
RELEASE
Indicates that you press the button with the coordinating icon on
whichever set you are using.