Mitel 5055 Telephone User Manual


 
Appendix C — Configuration Files
- 73 -
# 2) if the above proxy_addr (domain.com) is not resolvable from the DNS server,
# this ip address will be used in place of the proxy address
outbound_ip= 192.168.0.1
#outbound server proxy port
outbound_port= 5060
# sip registrar address
# could be same as or different from the proxy_addr above
registrar=
# sip registrar port
registrar_port= 5060
# Registration duration in seconds for each register request
# the server may respond with a different duration
register_expire= 7200; in seconds
# Registration authentication method
# choice [0-NONE, 1-BASIC, 2-DIGEST]
auth_method= 0
# sip voice mail server addresssip phone willsend the "subsrib" request for message-
summary to this address
voice_mail_srv=
# auto forward to voice mail server after num of rings
voicemail_ringnum=4
# sip voice mail server port
voice_srv_port= 5060
# emergency number
# integer string
# when user dials this string, the phone will send the sip request to e911_ip
emerg_number= 911
# emergency ip address
# must be an ip address
emerg_ip= 192.168.0.1
# e911 port number
emerg_port= 5060
##################################################################################
# Media configuration
##################################################################################
# audio codec to offer
# the codec(s) you choose here, will be listed in the INVITE or OPTION's SDP
# choice 0-g711 uLaw
# 1-g711 ALaw
# 2-g729A
# 3-g729A and g711 uLaw
# 4-all of the above codecs
audio_codec=0
# audio codec packet size
# currently this parameter is only applicable to the g711 codec
# choice [10, 20, 30] ms
audio_pkt_size= 20; ms
# dtmf type
# defines the way the DTMF digits will be sent across
# choice [0-automatic, 1-outband & inband, 2-outband only, 3-inband only
# automatic means when a "telephone-event" is being received from the peer party, send
the
# DTMF digit in the outband-only mode
#