5055 SIP Phone User Guide (Rev. A)
- 36 -
• Advanced Settings:
− TFTP configuration (allows configuration of SIP Phones using configuration files; see
Configuration Files on page 38 for more information).
− Type of Service and 802.1 Priority (Quality of Service parameters).
− Virtual LAN ID.
− PPPoE status and PPPoE login name and password.
Using the Web Configuration Tool
1. Access the Web Configuration Tool (see The Web Configuration Tool on page 7).
2. Click Network Configuration.
3. Add/update the information as needed.
4. Click the Save and Reboot button. A confirmation screen is displayed.
5. Click the OK button. The SIP Phone is updated and reboots.
Using the SIP Phone Menu Interface
1. Press the Menu key.
2. Press the >> softkey until “PHONE SETTINGS?” is displayed, and press the OK softkey.
3. Press the softkey until “4.NETWORK SETTINGS?” is displayed.
4. Press the OK softkey.
5. “DHCP” is displayed with its current status (“*ON*” or “*OFF*”).
6. If needed, press the TurnOff softkey to disable DHCP, or the TurnOn softkey to enable
it.
7. Press the Next softkey until the next parameter you want to change is displayed.
8. Press the Review softkey to view its current setting.
• If you need to change the value, press the Change softkey, enter the new value,
then press the Submit softkey (when the entry can only be an IP address, pressing *
twice, rapidly - enters a period).
• To leave the value as it is, press the Exit softkey.
9. Repeat steps 7 and 8 until all the desired changes have been made.
10. Press the Exit softkey, then the Menu key to return to the default display.
11. For the settings to take effect, you must restart your SIP Phone:
• When you are back in the default display, press the Menu key.
• Press *, then 0 on the keypad. The SIP Phone restarts.