Filter
Top Products
5055 SIP Phone User Guide (Rev. A)
- 44 -
Menu Key Commands
There are a few other settings you can access using the SIP Phone’s Menu key.
Menu + Line Key Commands
1. These commands give you access to information about your SIP Phone. To access
them, press the Menu key, then press the appropriate Line key. Press the Menu key to
return to the default display.
Table 4 Menu + Line Key Commands
Display Menu + Line 1 Menu + Line 2 Menu + Line 3
Top Line SIP Phone IP address
Main software
version
Display name
Bottom
Line
SIP Phone MAC
address
Boot software
version
User name
Menu + Keypad Commands
These commands perform actions on the SIP Phone. To access them, press the Menu key,
then each of the keypad keys in succession.
• To restart the SIP Phone: Menu, *, 0.
• To reset the SIP Phone to factory defaults: Menu, *, #, hold 3.
Caution: Resetting the SIP Phone to factory defaults will erase all the programming on
the SIP Phone, and replace it by the factory default settings.