Filter
Top Products
5055 SIP Phone User Guide (Rev. A)
- 32 -
Administrator Tools
This section contains the following information on configuring the administrative settings of
the 5055 SIP Phone:
• Changing Passwords
• Setting Up User Profiles
• Creating/Modifying a SIP Account
• Modifying the Network Configuration
• Upgrading the Firmware of the SIP Phone
• Additional Settings
These settings are changed using the Web Configuration Tool or the SIP Phone Menu
Interface.
Note: You cannot change these settings while on a call.
Changing Passwords
The Administrator can change the password for all defined users using the Web
Configuration Tool or the SIP Phone Menu Interface.
Note: The Administrator password should be changed as soon as possible to prevent
unauthorized access to the Administrator functions of the SIP Phone.
Using the Web Configuration Tool
1. Access the Web Configuration Tool using the Administrator user name and password
(see The Web Configuration Tool on page 7).
2. Click Security Config.
3. Change the passwords as required (note: you cannot change user names using this
screen).
4. Click the Apply button. A confirmation screen is displayed.
5. Click the OK button. The SIP Phone is updated.
Using the SIP Phone Menu Interface
You must repeat this procedure for each password that needs to be changed.
1. Press the Menu key.
2. Press the >> softkey. “USERS?” is displayed.
3. Press the OK softkey.
4. Press the softkey until “4.CHANGE PASSWORD?” is displayed, and press the OK
softkey.
5. Enter the Administrator user name, or the user name for the user profile whose password
you are changing, and press the Submit softkey.