Administrator Tools
- 41 -
Note: If you set the audio codec type to G.729, the users will not be able to use the
Conference Call feature.
4. Click the Apply button. A confirmation screen is displayed.
5. Click the OK button. The SIP Phone is updated.
Resetting to Factory Defaults
If needed, you can erase all the settings of a SIP Phone using the SIP Phone Interface:
1. Press the Menu key.
2. Press the * key on the keypad.
3. Press the # key on the keypad.
4. Press and hold the 3 key on the keypad until “USE FACTORY DEFAULTS?” is displayed.
5. Press the YES softkey. The settings are reset, and the phone reboots.