Mitel 5055 Telephone User Manual


 
5055 SIP Phone Features
- 13 -
6.
For ENTER USERID: enter your SIP Registration user name, and press the Submit
softkey.
7. For ENTER PASSWORD: enter your SIP Registration password, and press the Submit
softkey (if your SIP Service Provider does not require a password, enter any character,
and delete it using the <−−− softkey before pressing the Submit softkey).
8. For CONTACT IP ADDREESS: enter the SIP Phone’s IP address, and press the Submit
softkey.
9. For SERVER ADDRESS: enter your SIP Service Provider server address, and press the
Submit softkey.
10. For TO ADDRESS: enter <user>@<SIP server address>, and press the Submit softkey.
11. For REGISTRATION METHOD: select the registration method by pressing the
appropriate softkey:
None: no registration authentication.
Basic: Authentication
Digest: Authentication
12. The display shows the registration method chosen. Press the Submit softkey to confirm
your choice, or the Cancel softkey to choose another registration method (step 11).
13. Enter the registration duration (in hours), and press the Submit softkey (after that
duration, you will automatically be de-registered).
14. The display shows “REGISTER NOW”. Press the Confirm softkey to register, or the
Cancel softkey to change your registration duration (step 13).
When registration is complete, the display shows “REGISTRATION SUCCESSFUL”.
Making and Answering Calls
This section shows you how to make and receive calls with the SIP Phone. Only basic call
making procedures are shown (that is, calls made using the keypad). For information on
other call making features see Using the SIP Phone Features on page 17.
Your SIP Phone can be used in any of the three following modes:
Handset mode: this is when you are using the handset to talk and listen to your party.
Headset mode: this is when you have a headset connected to your SIP Phone, and you
use it to talk and listen to your party. Headset mode is activated by pressing the Headset
key (you can have a headset connected to your SIP Phone and still use the handset to
make your calls).
Handsfree mode: this is when you are using the SIP Phone’s handsfree speaker to talk
and listen to your party. Handsfree mode is activated by pressing the Speaker key.
This section shows how to make and receive call in any of the three modes, as well as how to
change from one mode to another. In the rest of the document, instructions are given for the
handset mode only, for clarity’s sake.